SIPPE 2010 Shanghai 5th International Petroleum & Petrochemical Technology Equipment Exhibition (SIPPE) is a key exhibition strongly supported by Shanghai Municipal Government and China Council For The Promotion Of International Trade(CCPIT). SIPPE is organized by Shanghai Petroleum Society, CCPIT Pudong Sub-Council, Shanghai Pudong International Exhibition Corporation and Shanghai Aiexpo Exhibition Service Co., Ltd. In the past 4 years, with the support of industry organizations and enterprises home and abroad, SIPPE has been growing year by year. .

We're glad to inform that Vector InfoTech will be participating in the event from 25 November – 27 November 2010 at Shanghai New International Exhibition Center(SNIEC). (For more info, pls go to : http://www.sippe.org.cn).

Do visit us at Hall: W4, Booth No : 4T29. Hope to see your there.

Back to Top

As one of the largest and most acclaimed oil and gas shows in the world, Abu Dhabi International Petroleum Exhibition & Conference 2010 (ADIPEC 2010) will again bring more exhibitors from around the world with their extensive ranges of products and services showcasing their capabilities in exploration and production, processing, refining, storage and transportation.

We're glad that Vector InfoTech will be participating in the event from 01 November – 04 November 2010 at Abu Dhabi National Exhibition Centre.(For more info, pls go to : http://www.adipec.com).

Do visit us at Booth No : 03065 . Hope to see your there.

Back to Top

ICA 2010 (The 10th International Exhibition & Conference on Instruments, Control & Automation) is recognised by the World-Fairs on Instruments, Measurement & Automation (World-FIMA) as the most important fair focusing on measurement and automation technology in Malaysia.

Since its inception in 1992 (18 years), ICA has proven time and again to be a high successful event. We're glad that once again we're participating in this big event at the Kuala Lumpur Convention Centre (KLCC) Hall 4 from 08 June - 10 June 2010. (For more info, pls go to : http://www.faconex.com/ica_intro.asp).

Do visit us at Hall 4, Booth 4125. Hope to see your there.

Back to Top

To our dearest customers & partners:

Vector InfoTech (Malaysia) has been relocated to new office premise from 19 Oct 2009.

Please direct all future correspondence to our new premise as follows:


Our new address:
Vector InfoTech Sdn Bhd
No. 37, Jalan 4/93, Taman Miharja,
Off Jalan Loke Yew,
55200 Kuala Lumpur, Malaysia.

There is no change in our contact numbers:
Phone: +60-3-9200-1396/7
Fax: +60-3-9200-1398

Back to Top

To our dearest customers & partners:

Vector InfoTech is pleased to announce that our new Industrial Retail Shop/Office in Jurong Island, Oasis@Sakra Amenity Building, No.3 Sakra Road, Singapore is now in operation.

Striving to provide Value Added Services & Supports to our customers in the Oil, Gas & Petrochemical Industries, our retail shop serves as a highly-targeted "Complete Total Solution" shop for our customers in the island.

Vector InfoTech Jurong Island Retail Shop
3 Sakra Road, #01-02,
Oasis @ Sakra,
Singapore 627878

Phone: +65-6265 5646
Fax: +65-6265 5646
Email: sales@vectorinfotech.com

Click here to find out more ....

Back to Top

To our dearest customers & partners:

Vector InfoTech (Singpore) has been relocated to new office premise from 15 June 2009.

Please direct all future correspondence with effect from 15 June 2009 to our new premise as follows:


Our new address:
Vector InfoTech Pte. Ltd.
No. 16 Arumugam Road, #07-00, Lion Bulding D, Singapore 409961

There is no change in our contact numbers:
Phone: 65-6356-7333
Fax: 65-6356-7322

Back to Top

Vector InfoTech's SBU unit (Special Business Unit) once again participating in the CommunicAsia2008 from 17– 20 June 2008 at the Singapore Expo.

We Thank you for your support to our participation and looking forward to your continuing support in our future exhibitions.

Back to Top

ICA 2008 (The 9th International Exhibition & Conference on Instruments, Control & Automation) is recognised by the World-Fairs on Instruments, Measurement & Automation (World-FIMA) as the most important fair focusing on measurement and automation technology in Malaysia.

The ICA2008 show will be the ninth show in 16 years. Its endurance is due to its ability to attract the right exhibitors and the right visitors. With over 5,000 sq metres of exhibition space, and more than 10,000 trade visitors, the event is one of the most anticipated events for both technology developers and users in the Asean region.

Vector InfoTech is once again participating in this big event at the Kuala Lumpur Convention Centre (KLCC) Hall 1 from 10June - 13June 2008.

We Thank you for your support to our participation and looking forward to your continuing support in our future exhibitions.

Back to Top

As promised, Vector InfoTech will be participating in this leading event CIA 2007(ControlAsia2007, InstrumentAsia2007 and AnaLabAsia2007) from 27 – 30 November 2007 at Suntec Singapore.

We Thank you for your support to our participation and looking forward to your continuing support in our future exhibitions.


Back to Top

OSEA was established two decades ago to be the industry event for Asia’s oil and gas industry. This international event brings together 10,000 industry professionals to tackle the pertinent concerns of the Asian oil and gas industry, from its technological front to changing market trends and expectations to new business potential and the running of its daily operations.

We are glad to see you again in our participation in the OSEA2006 (The 16th International Oil & Gas Industry Exhibition & Conference) from 05 – 08 December 2006 at Suntec Singapore and hope to see you again in our 2007 exhibitions.

Back to Top

INDIA is expected to grow faster than China and most other countries over the next 15 years, states a Deutsche Bank study. Henceforth , the Indian manufacturing industry is expected to growth in tandem with its economic growth.
Organized by IED Communications Ltd , AUTOMATION INDIA 2006 will bring together the best in the automation business. It will provide a unique opportunity for Singapore based companies who are supporting the automation / manufacturing companies to participate , interact and network with the India automation / manufacturers through business matching service, visits to manufacturing companies.

Vector InfoTech is glad to announce our participation in the Automation India 2006 (3rd International Exhibition & Conference) from 27 – 30 September 2006 at Bombay Exhibition Centre , Goregaon , Mumbai , India. (For more info, pls go to : www.iedautomation.org)

We Thank you for your support to our participation and looking forward to your continuing support and hope to see you again in our future exhibitions.

Back to Top

ICA has gained global recognition when it was endorsed by the World-Fairs on Instruments, Measurement & Automation (World-F.I.M.A.) as the most important Fair on Measurement & Automation technology in Malaysia. With this endorsement, ICA is now placed among some of the world's best.

Vector InfoTech is pleased to participate in the ICA 2006 (The 8th International Exhibition & Conference on Instruments, Control & Automation) from 20 June - 23 June 2006 at the Kuala Lumpur Convention Centre (KLCC) Hall 1 & 2. (For more info, pls go to : www.faconex.com)

We thank you for your support and looking forward to see you again in our next exhibition.

Back to Top

We (Vector InfoTech) Thank you for your support to our participation in the CIA 2005 (ChemAsia2005, InstrumentAsia2005 and AnaLabAsia2005) from 29 November - 02 December 2005 at the Suntec Singapore.

We look forward to your continuing support and hope to see you again in our future exhibitions.

Back to Top

We (Vector InfoTech) Thank you for providing your support to our participation in the Oil & Gas Asia 2005 (The 10th International Oil, Gas & Petrochemical Engineering Exhibition) from 13 – 16 June 2005 at the Kuala Lumpur Convention Centre, Malaysia.

We look forward to your continuing support and hope to see you again in our 2007 shows.

Back to Top

Singapore, January 10, 2005– Vector InfoTech Pte Ltd, a regional provider of Industrial Telecommunication & Data Communication Systems and Networking Products, proudly announces that the company has successfully obtained the ISO 9001:2000 certification for conforming to the Quality Management System Standard – a quality standard that is recognized and respected worldwide.

The registration approval was received from SGS International Certification Services, a global leading inspection, verification, testing and certification company whom act as an independent party to execute an extensive review of the company’s quality management system.

This ISO 9001:2000 certification is valid for our: “Design of Industrial Telecommunication & Data Communication Systems and Networking Solutions” and “Supply of Industrial Telecommunication & Data Communication Systems and Networking Products”.

The new version of the ISO 9001 standard places greater emphasis on top management involvement in the quality process, as well as greater focus on customers' satisfaction and continuous improvement. The new standard is designed to cover all the important processes affecting the quality of the products, solutions and services.

Click here to read more about the annoncement..

Back to Top

To our dearest customers & partners:

Vector InfoTech (Singpore) has moved to a bigger premises in July 2004.
Please direct all future correspondence to our new premise as follows:


Our new address:
No. 91 Defu Lane 10, #04-01
Swee Hin Building, Singapore 539221

There is no change in our contact numbers:
Phone: 65-6356-7333
Fax: 65-6356-7322

Back to Top

We (Vector InfoTech) Thank you for providing your support to our participation in the 7th International Exhibition on ICA 2004 (Instrumentation, Control and Automation Techology) from 08-11 June 2004 at the Putra World Trade Centre, Kuala Lumpur, Malaysia.

We look forward to your continuing support and see you again in CIA2006.

Back to Top

To establishing close contact with our customers and consumers at anytime through Internet by providing the latest information on products and services round the clock, Vector InfoTech is pleased to annouce it's launching of the electronic commerce Web based purchasing system (RFQ - Request for Quotation) on 1st of December 2003.


Back to Top

03 & 04 December 2003

Using OPC To Get More Mileage From Your Existing Automation Assets

OPC is the most popular and cost-effective technology available to satisfy the information demands of both plant and head office people. From the shop floor to the top floor, OPC technology can significantly decrease the time and costs when integrating systems.

This workshop will introduce you to the fundamentals of OPC, in addition intermediate and advance concepts will be discussed. Come hear what OPC industry expert have to say about new emerging trends and the benefits of OPC technology.

Main Speaker : Matrikon, Canada, Mr. Randy Kondor

Back to Top

We (Vector InfoTech) Thank you for providing your support to our participation in the CIA 2003 (ChemAsia, InstrumentAsia and AnaLabAsia) from 2-5 December 2003 at the Suntec Singapore, Level 4.

We look forward to your continuing support and see you again in CIA2005.

Back to Top

Welcome to our newly revamped website!

Our dedication to provide our clients with " Total Solution " to their day-to-day operations as well as more complex system integration projects and data communications problems has lead to the development of our new site.

We hope that your surfing experience will be greater than before.

Back to Top